Glass doors are very common in daily life, and their appearance and performance can meet our needs. For some people who like to install by themselves, how to install glass door clips?

1. Lay-out and positioning of glass door clip installation

The fixed glass and movable glass doors are combined into a complete glass door, and then according to the requirements of the design and construction drawings, the uniform lay-out and positioning are carried out, and the position of the door frame is determined.

2. The limit slot at the top of the door frame for glass door installation

The width of the limit groove The thickness of the glass is 2-4 mm, and the depth of the limit groove is 10-12 mm.

3. Installation of metal veneer and wooden bottom bracket for glass door installation

First fix the square wood on the ground, and then stick the metal veneer on the square wood with all-purpose glue.

4. Vertical door frame installation for glass door installation

Use the center line to nail the door frame square wood, use plywood to determine the position of the door frame column, and finally wrap the metal decorative surface. Install glass for glass door clip installation Use a glass suction cup machine to suck up the thick glass, then lift it up and move it to the position where it needs to be installed. The steps are to first insert the upper part of the glass into the limit slot at the top of the door frame, and then insert the lower part of the glass into the bottom bracket slot.